PDA

View Full Version : Help to reassemble a Bersa 383 DA



David H
03-20-2015, 07:19 PM
All - New here, but have owned a Bersa 383 DA since '92 when I bought it from a buddy for $45 with one magazine. Well, I haven't shot it recently and when I went to shoot it, it began to not fire properly, though I could manually cock the hammer, but the trigger would not trip it. Anyway, probably should of oiled it first, so I disassembled it and thought maybe it was the trigger spring, and yes the trigger is also disassembled but the trigger spring does not seem to be broken. Now here is where I admit I am a moron, because I failed to note how the trigger spring/slide stop went back into place. Can anyone offer any help on how to reassemble? Or is there anyone in MN that knows more than me about the reassembly process? I really want to get it back together as I bought two more magazines that cost me more than I originally paid for the pistol. Any help is appreciated. Thanks, David H

mitchr
03-20-2015, 07:36 PM
Welcome to Bersa Chat David H. Sorry to hear of your trouble & I know the feeling. :redface: Pollyb is our resident expert on Bersa .380s & he should be along to help, or you might send him a PM.

As for lubrication, generally it only requires a standard field strip & that's much easier to do. :smile:

clag39
03-20-2015, 07:38 PM
Welcome to BERSA CHAT David.. See if this might help you any... http://www.bersachat.com/forums/showthread.php?8295-Model-383-Parts-Diagram-and-383DA-383A-Info

mitchr
03-20-2015, 07:40 PM
In the meantime, here's a link to a thread Pollyb provided which may or may not help you. Check it out.

http://stevespages.com/pdf/bersa_383.pdf

mitchr
03-20-2015, 07:41 PM
I see Clag beat me by a couple minutes!!

pollyb
03-20-2015, 10:48 PM
Welcome David H,

clag39 & mitchr sent you in the right direction....let us hear of your success upon reassembly. :smile:

Grayman
03-24-2015, 05:19 PM
I cam across this while looking for help on mine
https://www.youtube.com/watch?v=S-UXA-mfnws