View Full Version : Hello From Jacksonville, FL

08-27-2012, 07:30 AM
Hey guys,

I bought a BP9CC a few months back and have 400+ rounds through it. I am a novice shooter and have only been going to the range on a regular basis for the last few months. It has been challenging (and fun!) to shoot such a small gun. My other firearms include a Gen 4 Glock 17 9MM, Ruger Mark 1 pistol and a Ruger 10/22. I enjoy shooting all of them when I get the chance.

I do have a nagging issue with the BP9CC that I hope to rectify with advice from this forum. I have my CWP and have been carrying the Bersa for the last few weeks. However, out of the 400 rounds I have put through it, I've had 3 light strikes resulting in failure to fire. Those failures are always in the back of my mind.

I found the trigger mod thread in this forum and took apart striker assembly. I noticed no metal shavings but I did see where the inside of the striker tube had been scored by the c-clip. I filed down the c-clip, cleaned, greased the assembly and threw it back together. Should I replace the striker as well since it is scored on the inside? I don't have the ability to refinish the inside of the tube. Thanks,


08-27-2012, 09:02 AM
Welcome from Jax!

Come on out to the IDPA match Saturday at Gateway.

08-27-2012, 11:53 AM
Welcome to Bersa Chat. Someone should be along that can help you.

08-28-2012, 05:53 PM
Welcome to the forum from Stone Mountain Georgia

Reginald Carstairs
08-28-2012, 06:19 PM
Welcome from Winter Park

08-28-2012, 06:27 PM
Welcome from the armpit of NC! Charlotte NC!

08-28-2012, 07:33 PM
Welcome to the forum. You will learn a lot here. These folks have quite a bit of experience and they are wiling to share their knowledge.

08-29-2012, 04:23 AM
Welcome from Jax!

Come on out to the IDPA match Saturday at Gateway.

Gateway is where I practice, I have watched a couple of IDPA matches. I'm out of town this wknd but may give it a try in the future.

09-13-2012, 01:04 AM
hello and welcome