PDA

View Full Version : Another Holster For Bersa .380s



tpelle
07-10-2011, 08:24 AM
I don't know if this has been previously posted, but I was browsing sites looking for a holster for another handgun when I saw this:

http://www.cabelas.com/product/Shooting/Shooting-Accessories/Holsters-Belts|/pc/104792580/c/104769180/sc/104388480/Galco174-Stinger-Holster/1086120.uts?destination=%2Fcatalog%2Fbrowse%2Fshoo ting-shooting-accessories-holsters-belts%2F_%2FN-1100233%2FNo-96%2FNs-CATEGORY_SEQ_104388480%3FWTz_l%3DSBC%253BMMcat1047 92580%253Bcat104769180%26WTz_st%3DGuidedNav%26WTz_ stype%3DGNP&WTz_l=SBC%3BMMcat104792580%3Bcat104769180%3Bcat104 388480

Good mainstream brand and not too bad of a price. And they used a Bersa in the pic, too!

luvthegun
07-10-2011, 04:00 PM
I don't know. Zoomed in and it don't look like it fits right. The trigger guard don't look like it fits in the molding right. And the 380 bottom tappers up alot. Don't see that in the mold either. Looks like a one size fits many. But I'm sure some will love it.

Ubaldo99
07-10-2011, 04:37 PM
Have to agree with Luvthegun.... Not a bad looking holster, overall, but doesnt appear to have a leather flap to prevent "gouging" by the Bersa's prominent tang into the wearer's side. That's been my main complaint about carrying the Bersa.

luvthegun
07-10-2011, 05:35 PM
It took me awhile to figure out. But if you zoom in and go back and forth between the two photos. It looks like the position of the gun and the holster differs. Which seems to indicate slop in the holster. Look at the grip of the gun and trigger guard. On one pic the grips look dead on but trigger guard is off. The other trigger guard looks dead on but grips looks off.

Michael T
07-10-2011, 08:34 PM
Condorsflight has for $52 before our discount so that put at 46.80 and shipping I tried to check on their shipping and couldn't get

tpelle
07-10-2011, 08:37 PM
Yeah, maybe you're right. Personally I have the Don Hume IWB holster. My Bersa is actually the FireStorm model without the hooked trigger guard, and the holster is boned for the hooked trigger guard of the Thunder mode, but other than that the holster fits fine. But I think the Don Hume holster is also used for a Kel-Tec pistol as well.

Michael T
07-10-2011, 08:38 PM
Have to agree with Luvthegun.... Not a bad looking holster, overall, but doesnt appear to have a leather flap to prevent "gouging" by the Bersa's prominent tang into the wearer's side. That's been my main complaint about carrying the Bersa.


That tang prevent RR tracks across you shooting hand Order one of the holsters made here by members and they have the sheild that that protects the pistol . I have a tire around me and I am not bothered You must be skin and bones.


Don Hume was who in early days we told people to go to. A employee who answered phone when I called them said she had a Thunder and brought it to work so They could find a holster for us. A model for the kahr as I remember worked . Because of their willness to help I bought 2 holsters and other members bought . Nate started UBGholsters and we all went to his custom holsters . Now many have holsters for Bersa wasn't that way in 2004/2005