“Making “Wolfgang
Results 1 to 12 of 12

Thread: The Model 10's

  1. #1
    VIP Site Supporter
    I'm gonna be a Daddy!
    John's Avatar
    Join Date
    Apr 02 2010
    Location
    Arizona Forever!
    Posts
    4,167

    The Model 10's

    All is right with the world. I met up with the gentleman for the 4" this morning and it was as advertised. Very good condition, but few dings and scratches.

    Then I met up with the snub nose 10-5 guy this afternoon. He called me when I was enroute and told me that the cylinder latch would not reset on it's own and had to be held forward and cock the gun to reset to be able to fire the gun. I was already on my way so we met up. I took a look at it. It was packaged in box, wrapped in either a town table cloth or handkerchief and stored away for a while. The box has a stamp of October 1966. There is a spot on the barrel as he had said, but its raised up, and I think it's something stuck onto the barrel and not rust. Little bit of Hoppes didn't do anything, but I didn't try too hard yet to clean it off.

    Other than that it appears to be LNIB. It was gunked up and it appears his dad used some heavy oil or other type of motor oil to store the guns. Very "slow" when manipulating and spinning the cylinder, and the cylinder latch was as he described by phone. Grips have little to no wear. I couldn't pass up the deal.

    Got it, tore it down when I got home while the wife was cooking. I thought some oil might have been gunked up on the internals but it was actually the cylinder center pin spring that was gunked up. Polished up the extractor pin spring and it is like brand new. So here she is

    Snub1.jpg

    Snub2.jpg

    Snub3.jpg

    Snub4.jpg

    Snub5.jpg

    Snub6.jpg

  2. #2
    VIP Site Supporter
    I'm gonna be a Daddy!
    John's Avatar
    Join Date
    Apr 02 2010
    Location
    Arizona Forever!
    Posts
    4,167

    Re: The Model 10's

    Snub7.jpg

    A shot of the front of the cylinder. I only detect a burn mark around one chamber face and there's only a faint hint of a turn line. I'm thinking this gun has seen very little use. Has it really been sitting around for 51 years waiting to see what a real gun is supposed to be meant for?

  3. #3
    Revolver Phoenix_Dad's Avatar
    Join Date
    Apr 12 2010
    Location
    Phoenix, AZ
    Posts
    276

    Re: The Model 10's

    Very nice, I want one now :(
    Certified Armed Infidel .

  4. #4
    Slingshot Nakyak's Avatar
    Join Date
    Aug 08 2017
    Posts
    21

    Re: The Model 10's

    That's purdy!!

  5. #5
    Super Moderator
    One of the Kahunas
    PHMadness's Avatar
    Join Date
    Mar 29 2010
    Location
    Kirkland Washington
    Posts
    8,036

    Re: The Model 10's

    Good job John. I wish all of our kids did as they were told.

    Sent from my Pixel using Tapatalk
    "The kindest, most sensitive guy on the entire internet."
    Certified Armed Infidel

  6. #6
    Super Moderator
    One of the Kahunas
    pollyb's Avatar
    Join Date
    Apr 01 2010
    Location
    Lone Star State .. .................of mind
    Posts
    2,535

    Re: The Model 10's

    That Is great John. If you haven't seen this https://www.big45metalcleaner.com/ it works great on rust with a little oil.
    Long story short, jab is a male.
    Active member in Bersa Forums since 03-13-2005.

    Certified Armed Infidel

  7. #7
    VIP Site Supporter
    I'm gonna be a Daddy!
    John's Avatar
    Join Date
    Apr 02 2010
    Location
    Arizona Forever!
    Posts
    4,167

    Re: The Model 10's

    So i'm really looking at this snubnose and I really don't think it's ever been fired outside of the factory. I am hesitant to put the first marks on this little gun. I don't want it sitting in the safe, and I don't think a model 10 will ever bring in much cash, even unfired. But it's such a beauty.

  8. #8
    Super Moderator
    VIP Site Benefactor
    gun sane's Avatar
    Join Date
    Nov 14 2010
    Location
    Teetering on the Brink
    Posts
    16,311

    Re: The Model 10's

    Quote Originally Posted by John View Post
    But it's such a beauty.
    Just wait'll some Model 686 hussy comes along and steals your affection away.
    Never give the devil a ride. He will always want to drive.

  9. #9
    VIP Site Supporter VSPA's Avatar
    Join Date
    Apr 01 2010
    Location
    Humble/Atascocita, Republic of Texas
    Posts
    1,028

    Re: The Model 10's

    I don't remember what model number it was, but I was given a 5 shot stubbie S&W revolver back about eight years ago. Think it was built in the late '50 or early '60. Didn't much care for the way it handled so I gave it to my brother who had just moved into an apartment and wanted something besides his S&W 4 in SS .357 mag for HD
    ✟✟✟ USAF, Retired
    "...and HE said..."he that hath no sword, let him sell his garment, and buy one". Luke 22:36
    Life Mbr: VFW, DAV, VVA, VSPA, NRA,

  10. #10
    VIP Site Supporter
    I'm gonna be a Daddy!
    John's Avatar
    Join Date
    Apr 02 2010
    Location
    Arizona Forever!
    Posts
    4,167

    Re: The Model 10's

    I would guess it would have been a 36 or pre model 36 chiefs special. Possibly a 37 if it was airweight. I love the j frames and they fit me well, especially with the boot grips. I have a couple of those too

  11. #11
    VIP Site Supporter
    I'm gonna be a Daddy!
    John's Avatar
    Join Date
    Apr 02 2010
    Location
    Arizona Forever!
    Posts
    4,167

    Re: The Model 10's

    Alright, then shoot them I shall. Loaded up a bunch of my "lipstick" SWC's for tomorrow morning. And we can take ol' "Fire and Fury" out to the range for some fun

    IMG_4251.jpg

    IMG_4252.jpg

    And excuse all the finger prints on that pretty blue finish. See Hammer's thread on how he gets used to a new handgun and it might explain why!

  12. #12
    VIP Site Supporter VSPA's Avatar
    Join Date
    Apr 01 2010
    Location
    Humble/Atascocita, Republic of Texas
    Posts
    1,028

    Re: The Model 10's

    Quote Originally Posted by John View Post
    I would guess it would have been a 36 or pre model 36 chiefs special. Possibly a 37 if it was airweight. I love the j frames and they fit me well, especially with the boot grips. I have a couple of those too
    Thanks, Chiefs Special does register.
    ✟✟✟ USAF, Retired
    "...and HE said..."he that hath no sword, let him sell his garment, and buy one". Luke 22:36
    Life Mbr: VFW, DAV, VVA, VSPA, NRA,

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •